Aturan Penamaan Konektor RJ45 LINK-PP

Konektor RJ45 LINK-PP part numbers follow a well-structured naming convention designed to clearly communicate key product characteristics at a glance. Each segment of the part number represents specific technical information—including the product series, connector type, schematic, mechanical design, LED configuration, and RoHS compliance. This standardized format ensures consistency across the LINK-PP product line and helps engineers, buyers, and distributors easily identify and compare specifications.

🔢 Part Number Format:

The LINK-PP RJ45 Connector Series follows a structured naming convention to precisely identify product specifications. The format is:

LPJ / X / XXXX / X / X / NL

Below is a detailed breakdown of each segment:

1. First Part: LPJ — Series Identifier

LPJ mengacu pada Seri Konektor RJ45 LINK-PP, representing the brand and product family.

---

2. Second Part: X — Type Code

This code indicates the product type or form factor:

• /: 10/100Base-T Ethernet Series

• D: Vertical Type

• G: 1000Base-T (Gigabit Ethernet) Series

• K: Length = 1.3 inch

• U: Dual (RJ45 + USB Combo) Series

• E: RJ45 Jack (Non-integrated magnetics)

---

3. Third Part: XXXX — Schematic Code

A 4-digit code representing the internal schematic circuit.

🔍 For detailed schematics, please refer to the product datasheets or contact LINK-PP directly.

---

4. Fourth Part: X — Mechanical Code

This letter defines the mechanical structure, especially regarding LEDs and EMI fingers:

Kode	Konfigurasi
A	With LED and EMI-Finger
B	With LED and Non EMI-Finger
C	Without LED but with EMI-Finger
D	Without LED and EMI-Finger
E	With LED and EMI-Finger (L=4.9mm)
F	With LED and No EMI-Finger (L=4.9mm)
G	With LED and EMI-Finger (L=4.06mm)
H	With LED and No EMI-Finger (L=4.06mm)

---

5. Fifth Part: X — LED Code

Specifies LEDs colors and polarity using a code (letter or number):

💡 Complete LED Color Table

Kode	Left LED Color	Right LED Color
A	Y	G
B	G	Y
C	G	G
D	Y	G
E	G	Y
F	G	G
G	Y	G
H	G	Y
W	G	G
Z	G	G
28	G	Y
42	Y	G
4	G/Y	G/Y
31	G/O	G/O
47	Y/G	Y/G
65	G/R	G/R
Q	Y	G/O
U	G	Y/G
29	G	O/G
35	Y/G	Y
I	Y/G	G
O	O/G	Y
53	O/G	G
64	G/O	Y
97	Y/G	G
98	O/G	Y

⚠️ Note: Same LED colors may have different internal polarity.
LED Color Legend: Y – Yellow, G – Green, O – Orange, R – Red.

---

6. Sixth Part: NL — RoHS Compliance

NL indicates that the product is Sesuai RoHS, adhering to environmental safety standards.

📘 Product Naming Examples

✅ Example 1: LPJG16544A4NL

Konektor PCB RJ45 Port Tunggal 1000 Base-T dengan Tab Magnet Terintegrasi Menghadap ke Atas, LED Hijau&Kuning/Hijau&Kuning

• LPJ – Seri RJ45 LINK-PP

• G – Seri Gigabit 1000Base-T

• 1654 – Skema (lihat gambar)

• A – Dengan LED dan Jari EMI

• 4 – LED Kiri: Hijau/Kuning, Kanan: Hijau/Kuning

• NL – Sesuai RoHS

---

✅ Example 2: LPJU4203A64NL

1000 Base-T RJ45 Magjack With Dual USB Combo Tab Up Green&Orange/Yellow LEDs

• LPJ – Seri RJ45 LINK-PP

• U – Dual USB + RJ45 Combo

• 4203 – Skema (lihat gambar)

• A – Dengan LED dan Jari EMI

• 64 – LED Left: Green/Orange, Right: Yellow

• NL – Sesuai RoHS

---

✅ Example 3: LPJ0012DNL

10/100 Base-T RJ45 Connenctor Tab Down Without LED and EMI Fingers for Smart Home

• LPJ – Seri RJ45 LINK-PP

• / – 10/100Base-T Series

• 0012 – Skema (lihat gambar)

• D – No LED, No EMI Finger

• / – No LED

• NL – Sesuai RoHS

Ringkasan

The naming convention LPJ / X / XXXX / X / X / NL ensures precise identification of:

1. Product line (LPJ),

2. Connector type (/, D, G, etc.),

3. Schematic design (XXXX),

4. Mechanical features (A, B, C, etc.),

5. LED configuration (A, B, 28, etc.),

6. RoHS compliance (NL).