Bộ thu phát 1550nm có thể truyền dẫn xa bao nhiêu trên sợi quang đơn mode?

Giới thiệu

When designing fiber-optic networks, knowing how far a 1550nm transceiver can transmit is essential. This wavelength offers low attenuation, making it ideal for metro and long-haul links. This article explores typical transmission distances, key factors that affect them, and showcases Các mô-đun LINK-PP built for extended reach.

1. Typical Transmission Distances for 1550nm Modules

In và sợi quang đơn mode (SMF), 1550nm transceivers commonly support transmission distances between 40km, 80km and 120km, and in optimal conditions, up to 160km.

For example, mainstream Gigabit Ethernet modules labeled “ZX” often claim 80km to 120km reach. Long-haul versions pushing beyond 120km are less common but achievable with high-quality fiber and careful system design.

2. Factors Influencing Transmission Distance

Several important factors impact how far a 1550nm signal can travel:

Tổn hao do suy giảm sợi quang: SMF exhibits very low loss at 1550nm (~0.2 dB/km), allowing long spans with minimal signal degradation.
Transmit Power & Receiver Sensitivity: Modules with higher output power and sensitive receivers can extend reach.
Fiber Quality & Splicing: Every connector, splice, or bend introduces loss, reducing practical distance.
Use of Bộ khuếch đại sợi quang pha tạp erbium (EDFAs) or DWDM: Amplifying or multiplexing signals can further extend reach, especially over very long links.

3. Standard Ethernet Benchmarks

10GBASE-ER bộ thu phát operate at 1550nm and are rated for around 40 km over engineered SMF, or ~30 km on standard fiber.
10GBASE-ZR models—while not IEEE-standard—are commonly built to reach 80 km on high-grade fiber.

These industry benchmarks help frame the expectations for modern 1550nm optics.

4. LINK-PP Long-Reach Examples

Here are LINK-PP products designed for extended distances:

LS-SM551G-80I (1.25Gbps, 80 km): Industrial SFP with DOM support, LC duplex connectors, optimized for SMF at 1550nm.
được kiểm tra nghiêm ngặt nhằm đảm bảo tuân thủ đầy đủ (1.25Gbps, 100km): Compatible with Arista and other systems, offering long-haul performance with DOM and LC connectivity.
LS-SM5501-A2I (155Mbps, 120km): Industrial-grade SFP supporting up to 120 km, featuring DOM and DFB laser design.
LS-SM551G-A6I ( SFP, 160km): high performance, cost effective modules supporting data rate of 1.25Gbps and 160km transmission distance with SMF.

5. Quick Comparison Table

Phạm vi khoảng cách	Trường hợp sử dụng điển hình	LINK-PP Recommended Module
Lên đến 80km	Metro or campus backbone links	LS-SM551G-80I (1.25Gbps, 80km)
⚠️ Lưu ý quan trọng:	Regional or long-haul applications	LS-SM551G-A0C (1.25Gbps, 100km)
Tối đa 120 km	Extended reach, industrial environments	LS-SM5501-A2I (155Mbps, 120km)
Up to 120km (BiDi)	Long links with fiber economy	LS-BL55491G-A2I BiDi (1Gbps, 120km)
Up to 160km	Ultra-long haul under ideal conditions	cho các kết nối tầm trung lên tới 2 km. Giải pháp này cân bằng giữa chi phí và hiệu năng, thích hợp cho các kết nối trong phạm vi tòa nhà lớn. Các mô-đun LINK-PP rated for 160km

Kết luận

For 1550 nm transceivers over single-mode fiber, typical reach spans from 80 km to 120km, with specialized modules capable of 160km under optimal conditions. Factors like fiber quality, power budget, and system design directly affect performance. LINK-PP offers a comprehensive lineup of long-reach transceivers—from 80km to 160km-rated modules—with industrial-grade reliability.